Meshlab close holes how to#

It will pop up a window, which asks sholud SW perform import diagnose? accept yes.Here is optional, i am working SolidWorks, if you want to import STL file in SW and use there you can follow the these steps You repaired your STL file you can open it in any CAD Program.And then your STL file will be green, which means everthing is ok.After execution you have to make one more step, first click the apply repair, it will pop up small window, you can click remove old part or keep old part or cancel which ever you want.First click Automatic repair, it pops up small window, it will ask you what to do, there is two options first one is Default repair and second one is simple repair, hier will choose Default repair and press execute.At the bottom at right side you will see Automatic Repair and Apply Repair Buttons.It will appear your STL File in Mesh Format in triangles format.In Nettfabb click Repair button which is Red Cross.Load STL File which repaired with Meshlab.After then you should delete the Interfacing Faces with press Del button.It shows up Self interfacing faces and it is like below.

Select the Filters Menu > Cleaning and Repairing > Select Self Intersecting Faces.

What i found, it is easy to repair with meshlab and with nettfabb. I tried to open STL File in SolidWorks but there is always error, such as some surfaces are interfacing each other or some gaps in STL file. Sometimes we have a problem open these STL Files.

Meshlab close holes how to#

In this post i will explain how to repair STL file with Meshlab and Nettfabb.